I absolutely did authorize it. A separate tab to the Enphase opened, I authenticated, and was told that it was successful. The page was slightly different for v2 and v4.
There was no feedback whatsoever in the PVoutput tab reflecting that anything changed, though.
I saved the PVoutput system settings afterwards. It made no difference.
Are there specific browsers that need to be used ? I’m using Firefox 102. My privacy settings are set to strict. I also have Adblock plus and Ublock origin.
I just did the v4 authorization again.
The Enphase tab showed :
"Successfully authorized PVOutput to read your Enphase site data with code "
I went back to PVoutput, and was able to save the system. Does this imply the authorization worked ?
I still don’t see any production data for today - and the sun is shining right now. May need to wait a few minutes, though.
Just redid the authorization with a fresh Firefox browser profile, no extensions, and “standard” security settings. That seems to have made no difference. The production data is still not updating in pvoutput. It is showing in Enlighten just fine.
After having a closer look, the problem is related to using Enphase v4 as a secondary device.
It has been fixed now and the system is getting data from Enphase for today.
Apologies for the inconvenience, unfortunately you’ll have to manually upload the generation data for 5th of July.
Thank you very much for fixing it this quickly ! I will upload the data for the 5th manually.
I have a couple other questions - probably belongs in another thread, but …
I don’t believe my 2010 production is included in the totals, either.
I have tried uploading it again. The records are accepted, but not shown.
The 2010 data is there, click on the 2010 link to display daily summary data.
Either create a new system with updated size or update the existing system with the new size.
PVOutput keeps a record of the efficiency kW/kWh on each date using the currently configured system size.
If you entered records back in 2010 with the current system size it would be wrong.
Correct this by -
Interestingly, if I go to the monthly view, and click on the last page (#12), I see the following, which includes the 2010 monthly data :
https://pvoutput.org/aggregate.jsp?p=11&id=101193&sid=89088&t=m&v=3&o=date&d=desc
In this case, there are other pages I can click on to see the rest of the data for the other day, but I still have to go through a lot of pages and click “More” / “Efficiency” each time. Is this the only way ? Or is there a way to show more than 40 dates at a time on a single page, and then select these ? For example, show the daily data for an entire year on one page ?
API v4… 5 min or 15 minute intervals? Do they both work?
I switched to v4 today, set it to 5min/5min, and the “live” result was a 15 min stairstep cummulative energy curve, power was recorded only every third 5 min interval, and the green power curve disappeared altogether. Switched back to 15/15 intervals, and the intervals on the “live” page changed back to 15min, but power readings were not recorded at all. Totals for the day are a fraction of actual generation. Hoping tomorrows results may have reset themselves.
The max records under Customise may be set to 12.
This link shows 16 years.
I’m using the V4 API but finding it very unreliable. I’ve tried both 5 and 15 minute settings but it usually lags a few hours behind, and then goes and grabs huge chunks of data at a time. And then it stopped working completely on 29th June. I’ve just tried re-authorising to see whether that brings it back to life.
Starting July 4 enphase api v4 was working for me. 12 July no data. I am working on my own v4 api interface. Sometimes it worked, sometimes not. Looks like the server @ enphase is overloaded (503 error). By the way KB_West can not be edited and saved: I get the message it is not authorized. When authorizing again, I get the message it is already authorized for PVoutput (which is correct). I can not save any changes, due to this strange loop.
Data of July 12 is now there in PVoutput.
I mentioned a couple of posts back that I’m finding the Enphase integration unreliable. It’s currently 10:22am here in the UK. Last data showing in PVOutput is 9:15. I have it set for 15 minute updates. That means the last four API queries have failed.
When it does (finally) work it does grab the missing data, but this situation really isn’t ideal.
I’m using v4 and it stopped working here July 12th 21:45 CEST.
Cleared my config and attempted to reauthorize v4 (after revoking it beforehand) but now I’m met with a HTTP 403 from Login - Enlighten and the message “Something went wrong! Our Engineers are on it”.
edit 15/07: was able to reauthorize today and it’s working again.
When I try to authorise Enphase window tells me I don’t own any systems.
I have consumption data missing since I moved to v4 - everything else seems fine. It might be related to having two systems, I’m not sure - I can’t seem to delete the older system in any case. I can’t see any “Both” setting anywhere either… any pointers on how to sort this will be appreciated!
This has been fixed. The config will no longer error if you have already authorized for another system under the same account.
The updates from Enphase to PVOutput are between 20 minutes to 1 hour, depending on the donation status of the system.
Can you post a screenshot?
The “Both” direction and secondary device is only available for donation enabled accounts.
Unfortunately the account donation status expired a while ago, so saving the new config disabled the consumption side leaving only a primary device for generation.
