4/22/2025 Generation Recorded at Impossible 73+kWh When Enphase Shows 44.0kWh

[irklit]

UPDATE: the 4/22/2025 high recording of 73+kWh still needs an answer when Enphase had 44.0 kWh as the days production. The odd thing is I have a 2nd system here on PVOUT sourcing from the same Enphase system id and it recorded correctly for that day so do not understand why this one mentioned in this post recorded 73+. The sudden 15 minute interval I noticed on 4/23/2025 entry seems to be unrelated and because Enphase reset my grandfathered system to 15 minute intervals from 5 which I had them put back.

Hello BB.
Today I noticed that Tuesdays data for 4/22/2025 is recording a wrong number for this system. I have never and can never generate 73kWh on any best day. Did some updates occur on PVOUTPUT yesterday suddenly?. The link to the system in question is below. Attached is 2 pictures of the PVOUTPUT system showing the excessive generation the system supposedly did and the real generation that the Enphase system shows was actually generated of 44.0 kWh EXACTLY only. Is there a possibility that exact numbers are not behing handled correctly by you?
You should note my Enphase systems are grand fathered in to record 5 minute intervals and up to yesterday I have not had problems with PVOUTPUT recording my given day generation correctly.
And if I use RECALCULATE it simply reloads the generation 73kWh+ value to the day record.
Also on a given best day production to date I have NEVER generated more than 0.700 per 5 minute interval but for this day of April 22, 2025 you show me with more than 1kWh at at least some of the readings. I attached a picture showing the 9:40 to 9:45am 5 minute reading where 1.4 kWh was generated which is impossible. I dont know how many more are like this for the rest of the day.
I left this system profile in PVOUTPUT alone without manual updates to correct it so that you can see what I see as of this writing still here:
My PVOUTPUT system in question for 04/22/2025 generation recorded
and pic1

and pic 2

and pic 3

[sunrous]

Hi,
Looks like we have the same issue with PVOutput/Enphase, mine started today.

PVOutput from Enphase system since 11:00 datapoints changed from 5min to 15min by itself on 23/04

Hi, I noticed that till 11:00 CET i have datapoints every 5 minutes in PVOutput, but after 11:00 this changed to every 15 minutes. https://pvoutput.org/comparelive.jsp?sid=99840&df=20230624&dt=20250423 While there is/was no configurational change done by me on PVOutput or Enphase. What has happend? Did Enphase change something? Hope this will be solved soon. Edit: Looks like the data in PVOutput at 11:00 is a summary of the Enphase datapoints 10:50 + 10:55 + 11:00. Also for 10:45 the to…

Looks like youre pic3 also has the W(atts) @9:45 summarized of the 9:45 + 9:40 + 9:35 data.

[irklit]

UPDATE1: it seems indeed enphase is now recording at 15 minute intervals again which seems unrelated to the issue of high recording of this original problem inquiry. I have contacted enphase to ask them to reset my grandfathered system back to 5 minute intervals from 15 they now seem to be recording.
UPDATE2: I just got off a chat with Enphase asking them to reset my system on their site to 5 minute intervals since I am grand fathered in since my original 2012 install. I will monitor the recordings now for 5 minute intervals I started seeing on 4/23/2025 which was unrelated to the original post I made about a very high PRODUCTION recording of 73+kWh vs the real 44kWh that BB still needs to answer about for 4/22/2025 days production.
========
And BB as of today 4/23/2025 for the day live recording its showing this so something is broken as of 4/22/25 original post issue besides this one now too. Todays recording shows this bouncing around rather than a smooth arc for the same system.

4/23/2025 bouncing around arc rather than smooth

[irklit]

And more issues with todays recording. The thing is I track my system with 2 views. The other view I have not listed is fine. But this one is acting up. The only difference is inverter output name vs panel out put name. So not sure what the issue is with this and both have existed and not been changed since being created more than 10 years ago. See my post above to BB.