I’ve just had a system installed that uses 20 LG 300W panels, a Solaredge SE6000 inverter, and an LG 9.3kWh battery. I used the Solaredge monitoring portal to generate an API key and siteid, and created an output on pvoutput. However, at the moment pvoutput does not distinguish between power coming from discharge of the battery, and power coming from the panels, and while the battery is being charged the value displayed for power generated seems to be only what is not going to the battery. Is there something I can configure to graph solar production from the panels and self-consumption to and from the battery separately?
For example, here is the output for today: https://pvoutput.org/intraday.jsp?id=44190&sid=53358&dt=20170723. You can see there is a peak for power generated for about 10 minutes from 05:45, (this is power coming from the battery when the electric boost on the solar HWS kicks in), and then from sunrise until about 12:25 (at which time the battery reached 100% charge), the power shown as generated is pretty minimal as most of the PV output is going to the battery rather than being exported.