No Upload to PVoutput with SBF Spot-config on a Raspi 3B with SMA inverter

Upload Software SBFspot
#1

Hello community,

I try to install on my new Raspberry 3B the SBF Spot config to upload the results from my SMA 4000 inverter via bluetooth to PV put.

cat /etc/issue
Raspbian GNU/Linux 10 \n \l

The install procedure runs quite good, and I saw to CSV files in

It seem that the CSV contains the right data (if I edit the ASCII file in a text editor)in the folder from day to day
/home/pi/smadata/2019

But no upload to PV Org…

If I run the command
pi@raspberrypi:~ $ sudo systemctl status SBFspotUpload
● SBFspotUpload.service - SBFspot Upload Daemon
Loaded: loaded (/usr/local/bin/sbfspot.3/SBFspotUpload.service; enabled; vend
Active: failed (Result: exit-code) since Fri 2019-12-13 11:00:30 CET; 2 weeks
Process: 403 ExecStart=/usr/local/bin/sbfspot.3/SBFspotUploadDaemon (code=exit
Main PID: 403 (code=exited, status=1/FAILURE)

Dez 13 11:00:30 raspberrypi systemd[1]: Started SBFspot Upload Daemon.
Dez 13 11:00:30 raspberrypi SBFspotUploadDaemon[403]: /usr/local/bin/sbfspot.3/S
Dez 13 11:00:30 raspberrypi systemd[1]: SBFspotUpload.service: Main process exit
Dez 13 11:00:30 raspberrypi systemd[1]: SBFspotUpload.service: Failed with resul
lines 1-10/10 (END)

If its helpful I can also distribute the SBFupload.cfg and the SBF.cfg in the folder /usr/local/bin/sbfspot.3

What could be the root cause for this ?

Sorry I am not so familiar with a Linux / Unix and more a newbi :slight_smile:

Thank you for your feedback

Michael

#2

Try running /usr/local/bin/sbfspot.3/SBFspotUploadDaemon manually to see the error message
Also, have a look at the logfile

#3

Hi SBF,

If I try to running SBFspotUoladDaemon manually…
I get this failure message

pi@raspberrypi:~ $ /usr/local/bin/sbfspot.3/SBFspotUploadDaemon
/usr/local/bin/sbfspot.3/SBFspotUploadDaemon: /usr/lib/arm-linux-gnueabihf/libcurl.so.4: version `CURL_OPENSSL_3’ not found (required by /usr/local/bin/sbfspot.3/SBFspotUploadDaemon)

and in the log file I found this here
SBFspot V3.5.0
Yet another tool to read power production of SMA solar inverters
© 2012-2018, SBF (https://github.com/SBFspot/SBFspot)
Compiled for Linux (LE) 32 bit with SQLite support
Commandline Args: -v -ad1 -am0 -ae0 -cfg/usr/local/bin/sbfspot.3/SBFspot.cfg
Reading config ‘/usr/local/bin/sbfspot.3/SBFspot.cfg’
Mon Dec 30 06:00:01 2019: INFO: Starting…
sunrise: 08:29
sunset : 16:19
Nothing to do… it’s dark. Use -finq to force inquiry.
SBFspot V3.5.0
Yet another tool to read power production of SMA solar inverters
© 2012-2018, SBF (https://github.com/SBFspot/SBFspot)
Compiled for Linux (LE) 32 bit with SQLite support
Commandline Args: -v -ad1 -am0 -ae0 -cfg/usr/local/bin/sbfspot.3/SBFspot.cfg
Reading config ‘/usr/local/bin/sbfspot.3/SBFspot.cfg’
Mon Dec 30 06:05:01 2019: INFO: Starting…
sunrise: 08:29
sunset : 16:19
Nothing to do… it’s dark. Use -finq to force inquiry.
SBFspot V3.5.0
Yet another tool to read power production of SMA solar inverters
© 2012-2018, SBF (https://github.com/SBFspot/SBFspot)
Compiled for Linux (LE) 32 bit with SQLite support
Commandline Args: -v -ad1 -am0 -ae0 -cfg/usr/local/bin/sbfspot.3/SBFspot.cfg
Reading config ‘/usr/local/bin/sbfspot.3/SBFspot.cfg’
Mon Dec 30 06:10:01 2019: INFO: Starting…
sunrise: 08:29
sunset : 16:19
Nothing to do… it’s dark. Use -finq to force inquiry.
SBFspot V3.5.0
Yet another tool to read power production of SMA solar inverters
© 2012-2018, SBF (https://github.com/SBFspot/SBFspot)
Compiled for Linux (LE) 32 bit with SQLite support
Commandline Args: -v -ad1 -am0 -ae0 -cfg/usr/local/bin/sbfspot.3/SBFspot.cfg
Reading config ‘/usr/local/bin/sbfspot.3/SBFspot.cfg’
Mon Dec 30 06:15:01 2019: INFO: Starting…
sunrise: 08:29
sunset : 16:19
Nothing to do… it’s dark. Use -finq to force inquiry.
SBFspot V3.5.0
Yet another tool to read power production of SMA solar inverters
© 2012-2018, SBF (https://github.com/SBFspot/SBFspot)
Compiled for Linux (LE) 32 bit with SQLite support
Commandline Args: -v -ad1 -am0 -ae0 -cfg/usr/local/bin/sbfspot.3/SBFspot.cfg
Reading config ‘/usr/local/bin/sbfspot.3/SBFspot.cfg’
Mon Dec 30 06:20:01 2019: INFO: Starting…
sunrise: 08:29
sunset : 16:19
Nothing to do… it’s dark. Use -finq to force inquiry.
SBFspot V3.5.0
Yet another tool to read power production of SMA solar inverters
© 2012-2018, SBF (https://github.com/SBFspot/SBFspot)
Compiled for Linux (LE) 32 bit with SQLite support
Commandline Args: -v -ad1 -am0 -ae0 -cfg/usr/local/bin/sbfspot.3/SBFspot.cfg
Reading config ‘/usr/local/bin/sbfspot.3/SBFspot.cfg’
Mon Dec 30 06:25:01 2019: INFO: Starting…
sunrise: 08:29
sunset : 16:19
Nothing to do… it’s dark. Use -finq to force inquiry.
SBFspot V3.5.0
Yet another tool to read power production of SMA solar inverters
© 2012-2018, SBF (https://github.com/SBFspot/SBFspot)
Compiled for Linux (LE) 32 bit with SQLite support
Commandline Args: -v -ad1 -am0 -ae0 -cfg/usr/local/bin/sbfspot.3/SBFspot.cfg
Reading config ‘/usr/local/bin/sbfspot.3/SBFspot.cfg’
Mon Dec 30 06:30:01 2019: INFO: Starting…
sunrise: 08:29
sunset : 16:19
Nothing to do… it’s dark. Use -finq to force inquiry.
SBFspot V3.5.0
Yet another tool to read power production of SMA solar inverters
© 2012-2018, SBF (https://github.com/SBFspot/SBFspot)
Compiled for Linux (LE) 32 bit with SQLite support
Commandline Args: -v -ad1 -am0 -ae0 -cfg/usr/local/bin/sbfspot.3/SBFspot.cfg
Reading config ‘/usr/local/bin/sbfspot.3/SBFspot.cfg’
Mon Dec 30 06:35:01 2019: INFO: Starting…
sunrise: 08:29
sunset : 16:19
Nothing to do… it’s dark. Use -finq to force inquiry.
SBFspot V3.5.0
Yet another tool to read power production of SMA solar inverters
© 2012-2018, SBF (https://github.com/SBFspot/SBFspot)
Compiled for Linux (LE) 32 bit with SQLite support
Commandline Args: -v -ad1 -am0 -ae0 -cfg/usr/local/bin/sbfspot.3/SBFspot.cfg
Reading config ‘/usr/local/bin/sbfspot.3/SBFspot.cfg’
Mon Dec 30 06:40:01 2019: INFO: Starting…
sunrise: 08:29
sunset : 16:19
Nothing to do… it’s dark. Use -finq to force inquiry.
SBFspot V3.5.0
Yet another tool to read power production of SMA solar inverters
© 2012-2018, SBF (https://github.com/SBFspot/SBFspot)
Compiled for Linux (LE) 32 bit with SQLite support
Commandline Args: -v -ad1 -am0 -ae0 -cfg/usr/local/bin/sbfspot.3/SBFspot.cfg
Reading config ‘/usr/local/bin/sbfspot.3/SBFspot.cfg’
Mon Dec 30 06:45:02 2019: INFO: Starting…
sunrise: 08:29
sunset : 16:19
Nothing to do… it’s dark. Use -finq to force inquiry.
SBFspot V3.5.0
Yet another tool to read power production of SMA solar inverters
© 2012-2018, SBF (https://github.com/SBFspot/SBFspot)
Compiled for Linux (LE) 32 bit with SQLite support
Commandline Args: -v -ad1 -am0 -ae0 -cfg/usr/local/bin/sbfspot.3/SBFspot.cfg
Reading config ‘/usr/local/bin/sbfspot.3/SBFspot.cfg’
Mon Dec 30 06:50:01 2019: INFO: Starting…
sunrise: 08:29
sunset : 16:19
Nothing to do… it’s dark. Use -finq to force inquiry.
SBFspot V3.5.0
Yet another tool to read power production of SMA solar inverters
© 2012-2018, SBF (https://github.com/SBFspot/SBFspot)
Compiled for Linux (LE) 32 bit with SQLite support
Commandline Args: -v -ad1 -am0 -ae0 -cfg/usr/local/bin/sbfspot.3/SBFspot.cfg
Reading config ‘/usr/local/bin/sbfspot.3/SBFspot.cfg’
Mon Dec 30 06:55:01 2019: INFO: Starting…
sunrise: 08:29
sunset : 16:19
Nothing to do… it’s dark. Use -finq to force inquiry.
SBFspot V3.5.0
Yet another tool to read power production of SMA solar inverters
© 2012-2018, SBF (https://github.com/SBFspot/SBFspot)
Compiled for Linux (LE) 32 bit with SQLite support
Commandline Args: -v -ad1 -am0 -ae0 -cfg/usr/local/bin/sbfspot.3/SBFspot.cfg
Reading config ‘/usr/local/bin/sbfspot.3/SBFspot.cfg’
Mon Dec 30 07:00:01 2019: INFO: Starting…
sunrise: 08:29
sunset : 16:19
Nothing to do… it’s dark. Use -finq to force inquiry.
SBFspot V3.5.0
Yet another tool to read power production of SMA solar inverters
© 2012-2018, SBF (https://github.com/SBFspot/SBFspot)
Compiled for Linux (LE) 32 bit with SQLite support
Commandline Args: -v -ad1 -am0 -ae0 -cfg/usr/local/bin/sbfspot.3/SBFspot.cfg
Reading config ‘/usr/local/bin/sbfspot.3/SBFspot.cfg’
Mon Dec 30 07:05:01 2019: INFO: Starting…
sunrise: 08:29
sunset : 16:19
Nothing to do… it’s dark. Use -finq to force inquiry.
SBFspot V3.5.0
Yet another tool to read power production of SMA solar inverters
© 2012-2018, SBF (https://github.com/SBFspot/SBFspot)
Compiled for Linux (LE) 32 bit with SQLite support
Commandline Args: -v -ad1 -am0 -ae0 -cfg/usr/local/bin/sbfspot.3/SBFspot.cfg
Reading config ‘/usr/local/bin/sbfspot.3/SBFspot.cfg’
Mon Dec 30 07:10:01 2019: INFO: Starting…
sunrise: 08:29
sunset : 16:19
Nothing to do… it’s dark. Use -finq to force inquiry.
SBFspot V3.5.0
Yet another tool to read power production of SMA solar inverters
© 2012-2018, SBF (https://github.com/SBFspot/SBFspot)
Compiled for Linux (LE) 32 bit with SQLite support
Commandline Args: -v -ad1 -am0 -ae0 -cfg/usr/local/bin/sbfspot.3/SBFspot.cfg
Reading config ‘/usr/local/bin/sbfspot.3/SBFspot.cfg’
Mon Dec 30 07:15:01 2019: INFO: Starting…
sunrise: 08:29
sunset : 16:19
Nothing to do… it’s dark. Use -finq to force inquiry.
SBFspot V3.5.0
Yet another tool to read power production of SMA solar inverters
© 2012-2018, SBF (https://github.com/SBFspot/SBFspot)
Compiled for Linux (LE) 32 bit with SQLite support
Commandline Args: -v -ad1 -am0 -ae0 -cfg/usr/local/bin/sbfspot.3/SBFspot.cfg
Reading config ‘/usr/local/bin/sbfspot.3/SBFspot.cfg’
Mon Dec 30 07:20:01 2019: INFO: Starting…
sunrise: 08:29
sunset : 16:19
Nothing to do… it’s dark. Use -finq to force inquiry.
SBFspot V3.5.0
Yet another tool to read power production of SMA solar inverters
© 2012-2018, SBF (https://github.com/SBFspot/SBFspot)
Compiled for Linux (LE) 32 bit with SQLite support
Commandline Args: -v -ad1 -am0 -ae0 -cfg/usr/local/bin/sbfspot.3/SBFspot.cfg
Reading config ‘/usr/local/bin/sbfspot.3/SBFspot.cfg’
Mon Dec 30 07:25:01 2019: INFO: Starting…
sunrise: 08:29
sunset : 16:19
Nothing to do… it’s dark. Use -finq to force inquiry.
SBFspot V3.5.0
Yet another tool to read power production of SMA solar inverters
© 2012-2018, SBF (https://github.com/SBFspot/SBFspot)
Compiled for Linux (LE) 32 bit with SQLite support
Commandline Args: -v -ad1 -am0 -ae0 -cfg/usr/local/bin/sbfspot.3/SBFspot.cfg
Reading config ‘/usr/local/bin/sbfspot.3/SBFspot.cfg’
Mon Dec 30 07:30:02 2019: INFO: Starting…
sunrise: 08:29
sunset : 16:19
Nothing to do… it’s dark. Use -finq to force inquiry.
SBFspot V3.5.0
Yet another tool to read power production of SMA solar inverters
© 2012-2018, SBF (https://github.com/SBFspot/SBFspot)
Compiled for Linux (LE) 32 bit with SQLite support
Commandline Args: -v -ad1 -am0 -ae0 -cfg/usr/local/bin/sbfspot.3/SBFspot.cfg
Reading config ‘/usr/local/bin/sbfspot.3/SBFspot.cfg’
Mon Dec 30 07:35:01 2019: INFO: Starting…
sunrise: 08:29
sunset : 16:19
Nothing to do… it’s dark. Use -finq to force inquiry.
SBFspot V3.5.0
Yet another tool to read power production of SMA solar inverters
© 2012-2018, SBF (https://github.com/SBFspot/SBFspot)
Compiled for Linux (LE) 32 bit with SQLite support
Commandline Args: -v -ad1 -am0 -ae0 -cfg/usr/local/bin/sbfspot.3/SBFspot.cfg
Reading config ‘/usr/local/bin/sbfspot.3/SBFspot.cfg’
Mon Dec 30 07:40:01 2019: INFO: Starting…
sunrise: 08:29
sunset : 16:19
Nothing to do… it’s dark. Use -finq to force inquiry.
SBFspot V3.5.0
Yet another tool to read power production of SMA solar inverters
© 2012-2018, SBF (https://github.com/SBFspot/SBFspot)
Compiled for Linux (LE) 32 bit with SQLite support
Commandline Args: -v -ad1 -am0 -ae0 -cfg/usr/local/bin/sbfspot.3/SBFspot.cfg
Reading config ‘/usr/local/bin/sbfspot.3/SBFspot.cfg’
Mon Dec 30 07:45:01 2019: INFO: Starting…
sunrise: 08:29
sunset : 16:19
Nothing to do… it’s dark. Use -finq to force inquiry.
SBFspot V3.5.0
Yet another tool to read power production of SMA solar inverters
© 2012-2018, SBF (https://github.com/SBFspot/SBFspot)
Compiled for Linux (LE) 32 bit with SQLite support
Commandline Args: -v -ad1 -am0 -ae0 -cfg/usr/local/bin/sbfspot.3/SBFspot.cfg
Reading config ‘/usr/local/bin/sbfspot.3/SBFspot.cfg’
Mon Dec 30 07:50:01 2019: INFO: Starting…
sunrise: 08:29
sunset : 16:19
Nothing to do… it’s dark. Use -finq to force inquiry.
SBFspot V3.5.0
Yet another tool to read power production of SMA solar inverters
© 2012-2018, SBF (https://github.com/SBFspot/SBFspot)
Compiled for Linux (LE) 32 bit with SQLite support
Commandline Args: -v -ad1 -am0 -ae0 -cfg/usr/local/bin/sbfspot.3/SBFspot.cfg
Reading config ‘/usr/local/bin/sbfspot.3/SBFspot.cfg’
Mon Dec 30 07:55:01 2019: INFO: Starting…
sunrise: 08:29
sunset : 16:19
Nothing to do… it’s dark. Use -finq to force inquiry.
SBFspot V3.5.0
Yet another tool to read power production of SMA solar inverters
© 2012-2018, SBF (https://github.com/SBFspot/SBFspot)
Compiled for Linux (LE) 32 bit with SQLite support
Commandline Args: -v -ad1 -am0 -ae0 -cfg/usr/local/bin/sbfspot.3/SBFspot.cfg
Reading config ‘/usr/local/bin/sbfspot.3/SBFspot.cfg’
Mon Dec 30 08:00:01 2019: INFO: Starting…
sunrise: 08:29
sunset : 16:19
Nothing to do… it’s dark. Use -finq to force inquiry.
SBFspot V3.5.0
Yet another tool to read power production of SMA solar inverters
© 2012-2018, SBF (https://github.com/SBFspot/SBFspot)
Compiled for Linux (LE) 32 bit with SQLite support
Commandline Args: -v -ad1 -am0 -ae0 -cfg/usr/local/bin/sbfspot.3/SBFspot.cfg
Reading config ‘/usr/local/bin/sbfspot.3/SBFspot.cfg’
Mon Dec 30 08:05:01 2019: INFO: Starting…
sunrise: 08:29
sunset : 16:19
Nothing to do… it’s dark. Use -finq to force inquiry.
SBFspot V3.5.0
Yet another tool to read power production of SMA solar inverters
© 2012-2018, SBF (https://github.com/SBFspot/SBFspot)
Compiled for Linux (LE) 32 bit with SQLite support
Commandline Args: -v -ad1 -am0 -ae0 -cfg/usr/local/bin/sbfspot.3/SBFspot.cfg
Reading config ‘/usr/local/bin/sbfspot.3/SBFspot.cfg’
Mon Dec 30 08:10:01 2019: INFO: Starting…
sunrise: 08:29
sunset : 16:19
Nothing to do… it’s dark. Use -finq to force inquiry.
SBFspot V3.5.0
Yet another tool to read power production of SMA solar inverters
© 2012-2018, SBF (https://github.com/SBFspot/SBFspot)
Compiled for Linux (LE) 32 bit with SQLite support
Commandline Args: -v -ad1 -am0 -ae0 -cfg/usr/local/bin/sbfspot.3/SBFspot.cfg
Reading config ‘/usr/local/bin/sbfspot.3/SBFspot.cfg’
Mon Dec 30 08:15:02 2019: INFO: Starting…
sunrise: 08:29
sunset : 16:19
Connecting to 00:80:25:09:FD:27 (1/10)
Initializing…
SUSyID: 125 - SessionID: 817262147 (0x30B66E43)
SMA netID=02
Serial Nr: 7D2CC923 (2100087075)
BT Signal=71.8%
Logon OK
Failed to get current plant time (0)
getInverterData(sbftest) returned an error: -1
SUSyID: 78 - SN: 2100087075
Device Name: SN: 2100087075
Device Class: Solar Inverters
Device Type: SB 4000TL-20
Software Version: 02.07.00.R
Serial number: 2100087075
SUSyID: 78 - SN: 2100087075
Device Status: Ok
SUSyID: 78 - SN: 2100087075
Device Temperature: 0.0°C
SUSyID: 78 - SN: 2100087075
GridRelay Status: Information not available
SUSyID: 78 - SN: 2100087075
Pac max phase 1: 4000W
Pac max phase 2: 4000W
Pac max phase 3: 4000W
SUSyID: 78 - SN: 2100087075
Energy Production:
EToday: 0.000kWh
ETotal: 43368.467kWh
Operation Time: 42883.66h
Feed-In Time : 41539.11h
SUSyID: 78 - SN: 2100087075
DC Spot Data:
String 1 Pdc: 0.000kW - Udc: 0.00V - Idc: 0.000A
String 2 Pdc: 0.000kW - Udc: 0.00V - Idc: 0.000A
SUSyID: 78 - SN: 2100087075
AC Spot Data:
Phase 1 Pac : 0.000kW - Uac: 0.00V - Iac: 0.000A
Phase 2 Pac : 0.000kW - Uac: 0.00V - Iac: 0.000A
Phase 3 Pac : 0.000kW - Uac: 0.00V - Iac: 0.000A
Total Pac : 0.000kW
SUSyID: 78 - SN: 2100087075
Grid Freq. : 0.00Hz
SUSyID: 78 - SN: 2100087075
Current Inverter Time: 30/12/2019 08:21:54
Inverter Wake-Up Time: 29/12/2019 08:32:39
Inverter Sleep Time : 29/12/2019 16:20:57
ExportSpotDataToCSV()

  • ArchiveDayData() *

startTime = 5E092FF0 -> 30/12/2019 00:00:00
ExportDayDataToCSV()
Mon Dec 30 08:16:04 2019: INFO: Done.
SBFspot V3.5.0
Yet another tool to read power production of SMA solar inverters
© 2012-2018, SBF (https://github.com/SBFspot/SBFspot)
Compiled for Linux (LE) 32 bit with SQLite support
Commandline Args: -v -ad1 -am0 -ae0 -cfg/usr/local/bin/sbfspot.3/SBFspot.cfg
Reading config ‘/usr/local/bin/sbfspot.3/SBFspot.cfg’
Mon Dec 30 08:20:01 2019: INFO: Starting…
sunrise: 08:29
sunset : 16:19
Connecting to 00:80:25:09:FD:27 (1/10)
Initializing…
SUSyID: 125 - SessionID: 949844300 (0x389D794C)
SMA netID=02
Serial Nr: 7D2CC923 (2100087075)
BT Signal=72.2%
Logon OK
Failed to get current plant time (0)
getInverterData(sbftest) returned an error: -1
SUSyID: 78 - SN: 2100087075
Device Name: SN: 2100087075
Device Class: Solar Inverters
Device Type: SB 4000TL-20
Software Version: 02.07.00.R
Serial number: 2100087075
SUSyID: 78 - SN: 2100087075
Device Status: Ok
SUSyID: 78 - SN: 2100087075
Device Temperature: 0.0°C
SUSyID: 78 - SN: 2100087075
GridRelay Status: Information not available
SUSyID: 78 - SN: 2100087075
Pac max phase 1: 4000W
Pac max phase 2: 4000W
Pac max phase 3: 4000W
SUSyID: 78 - SN: 2100087075
Energy Production:
EToday: 0.000kWh
ETotal: 43368.467kWh
Operation Time: 42883.66h
Feed-In Time : 41539.11h
SUSyID: 78 - SN: 2100087075
DC Spot Data:
String 1 Pdc: 0.000kW - Udc: 0.00V - Idc: 0.000A
String 2 Pdc: 0.000kW - Udc: 0.00V - Idc: 0.000A
SUSyID: 78 - SN: 2100087075
AC Spot Data:
Phase 1 Pac : 0.000kW - Uac: 0.00V - Iac: 0.000A
Phase 2 Pac : 0.000kW - Uac: 0.00V - Iac: 0.000A
Phase 3 Pac : 0.000kW - Uac: 0.00V - Iac: 0.000A
Total Pac : 0.000kW
SUSyID: 78 - SN: 2100087075
Grid Freq. : 0.00Hz
SUSyID: 78 - SN: 2100087075
Current Inverter Time: 30/12/2019 08:26:49
Inverter Wake-Up Time: 29/12/2019 08:32:39
Inverter Sleep Time : 29/12/2019 16:20:57
ExportSpotDataToCSV()

  • ArchiveDayData() *

startTime = 5E092FF0 -> 30/12/2019 00:00:00
ExportDayDataToCSV()
Mon Dec 30 08:21:02 2019: INFO: Done.

Reading config ‘/usr/local/bin/sbfspot.3/SBFspot.cfg’
Mon Dec 30 10:30:02 2019: INFO: Starting…
sunrise: 08:29
sunset : 16:19
Connecting to 00:80:25:09:FD:27 (1/10)
Initializing…
SUSyID: 125 - SessionID: 916810855 (0x36A56C67)
SMA netID=02
Serial Nr: 7D2CC923 (2100087075)
BT Signal=72.5%
Logon OK
Failed to get current plant time (-1)
SetPlantTime returned an error: -1
getInverterData(sbftest) returned an error: -1
getSoftwareVersion returned an error: -1
SUSyID: 78 - SN: 2100087075
Device Name: SN: 2100087075
Device Class: Solar Inverters
Device Type: SB 4000TL-20
Software Version:
Serial number: 2100087075
SUSyID: 78 - SN: 2100087075
Device Status: Ok
SUSyID: 78 - SN: 2100087075
Device Temperature: 32.9°C
SUSyID: 78 - SN: 2100087075
GridRelay Status: Closed
SUSyID: 78 - SN: 2100087075
Pac max phase 1: 4000W
Pac max phase 2: 4000W
Pac max phase 3: 4000W
SUSyID: 78 - SN: 2100087075
Energy Production:
EToday: 0.518kWh
ETotal: 43368.986kWh
Operation Time: 42885.30h
Feed-In Time : 41540.65h
SUSyID: 78 - SN: 2100087075
DC Spot Data:
String 1 Pdc: 0.386kW - Udc: 280.50V - Idc: 1.378A
String 2 Pdc: 0.382kW - Udc: 311.39V - Idc: 1.229A
SUSyID: 78 - SN: 2100087075
AC Spot Data:
Phase 1 Pac : 0.766kW - Uac: 231.77V - Iac: 3.306A
Phase 2 Pac : 0.000kW - Uac: 0.00V - Iac: 0.000A
Phase 3 Pac : 0.000kW - Uac: 0.00V - Iac: 0.000A
Total Pac : 0.766kW
SUSyID: 78 - SN: 2100087075
Grid Freq. : 49.98Hz
SUSyID: 78 - SN: 2100087075
Current Inverter Time: 30/12/2019 10:36:52
Inverter Wake-Up Time: 30/12/2019 08:43:34
Inverter Sleep Time : 30/12/2019 10:36:56
ExportSpotDataToCSV()

  • ArchiveDayData() *

startTime = 5E092FF0 -> 30/12/2019 00:00:00
ExportDayDataToCSV()
Mon Dec 30 10:31:04 2019: INFO: Done.
SBFspot V3.5.0
Yet another tool to read power production of SMA solar inverters
© 2012-2018, SBF (https://github.com/SBFspot/SBFspot)
Compiled for Linux (LE) 32 bit with SQLite support
Commandline Args: -v -ad1 -am0 -ae0 -cfg/usr/local/bin/sbfspot.3/SBFspot.cfg
Reading config ‘/usr/local/bin/sbfspot.3/SBFspot.cfg’
Mon Dec 30 10:35:01 2019: INFO: Starting…
sunrise: 08:29
sunset : 16:19
Connecting to 00:80:25:09:FD:27 (1/10)
Initializing…
SUSyID: 125 - SessionID: 898597642 (0x358F830A)
SMA netID=02
Serial Nr: 7D2CC923 (2100087075)
BT Signal=72.5%
Logon OK
Failed to get current plant time (0)
getInverterData(sbftest) returned an error: -1
getSoftwareVersion returned an error: -1
getTypeLabel returned an error: -1
getDeviceStatus returned an error: -1
SUSyID: 78 - SN: 2100087075
Device Temperature: 33.2°C
SUSyID: 78 - SN: 2100087075
Pac max phase 1: 4000W
Pac max phase 2: 4000W
Pac max phase 3: 4000W
SUSyID: 78 - SN: 2100087075
Energy Production:
EToday: 0.590kWh
ETotal: 43369.058kWh
Operation Time: 42885.39h
Feed-In Time : 41540.73h
SUSyID: 78 - SN: 2100087075
DC Spot Data:
String 1 Pdc: 0.572kW - Udc: 284.67V - Idc: 1.998A
String 2 Pdc: 0.579kW - Udc: 307.18V - Idc: 1.888A
SUSyID: 78 - SN: 2100087075
AC Spot Data:
Phase 1 Pac : 1.141kW - Uac: 231.66V - Iac: 4.929A
Phase 2 Pac : 0.000kW - Uac: 0.00V - Iac: 0.000A
Phase 3 Pac : 0.000kW - Uac: 0.00V - Iac: 0.000A
Total Pac : 1.141kW
SUSyID: 78 - SN: 2100087075
Grid Freq. : 50.00Hz

  • ArchiveDayData() *

startTime = 5E092FF0 -> 30/12/2019 00:00:00
ExportDayDataToCSV()
Mon Dec 30 10:36:04 2019: INFO: Done.
SBFspot V3.5.0
Yet another tool to read power production of SMA solar inverters

SUSyID: 78 - SN: 2100087075
Grid Freq. : 50.00Hz
SUSyID: 78 - SN: 2100087075
Current Inverter Time: 30/12/2019 14:06:54
Inverter Wake-Up Time: 30/12/2019 08:43:34
Inverter Sleep Time : 30/12/2019 14:06:56
ExportSpotDataToCSV()

Please could you give me a hint ?

With best regards from Germany
Michael

#4

Hi,

the problem is solved, I read your other tips concerning the uploaddamemon with the actual Raspian software.

Thx

M.

1 Like