Take note the V in V10 and V12 are both in uppercase, they should be lower case v10 and v12
Now working!
Fixed:
/service/r2/froniuspost.jsp?key=XXXX&sid=XXXX&v9=Current_DC_String_1&v10=Voltage_DC_String_1&v11=Current_DC_String_2&v12=Voltage_DC_String_2
Mmh, any idea
https://pvoutput.org/intraday.jsp?id=64909&sid=57693&dt=20190703&gs=0&m=1
Energy in the DC1A colum?
Push service:
/service/r2/froniuspost.jsp?sid=57693&key=xxxxxxxx3bac94f357710d753&v7=Current_DC_String_1&v8=Voltage_DC_String_1&v9=EnergyReal_WAC_Sum_Produced
Energy is measured in Joules ( or kWh or Wh ). The fourth column in your Extended Data labeled EnergyRealProd shows as W ( Watts ).
If you look at the output of
How does it compare will the values that you see in PVO?
In solarweb all values are present and correct. When reading with another app direct from PVO:
{ “Body” : { “Data” : { “inverter/1” : { “Data” : { “EnergyReal_WAC_Sum_Produced” : { “Unit” : “Wh”, “Values” : { “0” : 0, “10200” : 0, “10500” : 0, “10800” : 0, “11100” : 0, “11400” : 0, “11700” : 0, “1200” : 0, “12000” : 0, “12300” : 0, “12600” : 0, “12900” : 0, “13200” : 0, “13500” : 0, “13800” : 0, “14100” : 0, “14400” : 0, “14700” : 0, “1500” : 0, “15000” : 0, “15300” : 0, “15600” : 0, “15900” : 0, “16200” : 0, “16500” : 0, “16800” : 0, “17100” : 0, “17400” : 0, “17700” : 0, “1800” : 0, “18000” : 0, “18300” : 0, “18600” : 0, “18900” : 0, “19200” : 0, “19500” : 0, “19800” : 0, “20100” : 0, “20400” : 0, “20700” : 0, “2100” : 0, “21000” : 0, “21300” : 0, “21600” : 0, “21900” : 1.9569444444444444, “22200” : 2.6272222222222221, “22500” : 3.0422222222222222, “22800” : 3.9369444444444444, “23100” : 5.2711111111111109, “23400” : 5.9638888888888886, “23700” : 6.5563888888888888, “2400” : 0, “24000” : 8.0894444444444442, “24300” : 11.144444444444444, “24600” : 14.783055555555556, “24900” : 18.676666666666666, “25200” : 18.414999999999999, “25500” : 18.043333333333333, “25800” : 18.78638888888889, “26100” : 20.94361111111111, “26400” : 21.854166666666668, “26700” : 22.015000000000001, “2700” : 0, “27000” : 24.180833333333332, “27300” : 25.269444444444446, “27600” : 25.863611111111112, “27900” : 29.210277777777776, “28200” : 29.848611111111111, “28500” : 31.807222222222222, “28800” : 33.736666666666665, “29100” : 34.689999999999998, “29400” : 34.989166666666669, “29700” : 33.382777777777775, “300” : 0, “3000” : 0, “30000” : 34.952222222222225, “30300” : 35.621388888888887, “30600” : 35.747777777777777, “30900” : 37.591388888888886, “31200” : 39.616944444444442, “31500” : 43.963611111111113, “31800” : 47.725000000000001, “32100” : 50.257222222222225, “32400” : 51.076944444444443, “32700” : 54.392499999999998, “3300” : 0, “33000” : 55.954166666666666, “33300” : 62.552777777777777, “33600” : 66.064999999999998, “33900” : 68.31583333333333, “34200” : 64.999722222222218, “34500” : 65.652500000000003, “34800” : 67.091666666666669, “35100” : 72.058055555555555, “35400” : 74.037222222222226, “35700” : 73.001666666666665, “3600” : 0, “36000” : 82.005277777777778, “36300” : 88.215277777777771, “36600” : 81.955277777777781, “36900” : 87.556666666666672, “37200” : 88.505833333333328, “37500” : 88.930833333333339, “37800” : 79.759722222222223, “38100” : 86.261944444444438, “38400” : 91.403333333333336, “38700” : 89.409166666666664, “3900” : 0, “39000” : 84.05916666666667, “39300” : 104.72055555555555, “39600” : 111.86361111111111, “39900” : 102.98555555555555, “40200” : 105.28749999999999, “40500” : 93.206666666666663, “40800” : 97.392777777777781, “41100” : 124.06638888888889, “41400” : 156.76333333333332, “41700” : 112.62527777777778, “4200” : 0, “42000” : 150.73194444444445, “42300” : 167.58500000000001, “42600” : 90.230555555555554, “42900” : 95.702222222222218, “43200” : 121.44805555555556, “43500” : 146.82444444444445, “43800” : 161.9963888888889, “44100” : 152.88222222222223, “44400” : 172.82138888888889, “44700” : 223.52472222222221, “4500” : 0, “45000” : 221.42583333333334, “45300” : 182.04916666666668, “45600” : 216.2475, “45900” : 209.06027777777777, “46200” : 223.77305555555554, “46500” : 222.53083333333333, “46800” : 222.62555555555556, “47100” : 225.02694444444444, “47400” : 165.91749999999999, “47700” : 154.66611111111112, “4800” : 0, “48000” : 159.10388888888889, “48300” : 120.57472222222222, “48600” : 135.73805555555555, “48900” : 219.93444444444444, “49200” : 242.4038888888889, “49500” : 213.28333333333333, “49800” : 150.12944444444443, “50100” : 197.64888888888888, “50400” : 229.6238888888889, “50700” : 247.66666666666666, “5100” : 0, “51000” : 246.05444444444444, “51300” : 211.28916666666666, “51600” : 136.35916666666665, “51900” : 131.34083333333334, “52200” : 126.21666666666667, “52500” : 208.61361111111111, “52800” : 175.09805555555556, “53100” : 206.92305555555555, “53400” : 245.74555555555557, “53700” : 231.24583333333334, “5400” : 0, “54000” : 215.27722222222224, “54300” : 179.24361111111111, “54600” : 252.6561111111111, “54900” : 247.28555555555556, “55200” : 123.34777777777778, “5700” : 0, “600” : 0, “6000” : 0, “6300” : 0, “6600” : 0, “6900” : 0, “7200” : 0, “7500” : 0, “7800” : 0, “8100” : 0, “8400” : 0, “8700” : 0, “900” : 0, “9000” : 0, “9300” : 0, “9600” : 0, “9900” : 0 }, “_comment” : “channelId=67830024” } }, “DeviceType” : 81, “End” : “2019-07-05T23:59:59+02:00”, “NodeType” : 97, “Start” : “2019-07-05T00:00:00+02:00” } } }, “Head” : { “RequestArguments” : { “Channel” : [ “EnergyReal_WAC_Sum_Produced” ], “EndDate” : “2019-07-05T23:59:59+02:00”, “HumanReadable” : “True”, “Scope” : “System”, “SeriesType” : “Detail”, “StartDate” : “2019-07-05T00:00:00+02:00” }, “Status” : { “Code” : 0, “ErrorDetail” : { “Nodes” : [] }, “Reason” : “”, “UserMessage” : “” }, “Timestamp” : “2019-07-05T15:24:42+02:00” } }
Hi,
According the the PVO Help EnergyReal_WAC_Sum_Produced can be pushed from ‘Meter Data’ and "Log Data’
- Meter Push (SolarAPI v1 - CurrentData - Meter)
- Log Data Push (SolarAPI v1 - Logdata - Data)
Are you pushing from Meter, Log or both?
I have found that the WiFi connection between my router and the inverter isn’t the best. Quite often the 5 minute ( non Log ) pushes do not seem to work whereas the Log push always seems to work. I find that the Log push will then fill in any ‘gaps’ in my data.
I push both. Meter and log.
I am also not shure if its not a “transportation” problem. The pvo is hardwired but i also had problems with the continuous writing from the values. Since the log push it also filles the gaps.
I will now stop to push the energy and will see if the string V an A are ok
Are / were you pushing EnergyReal_WAC_Sum_Produced via both the Meter & Log pushes from your inverter?
Fix a problem which potentially could have caused this. Please check in the next hour or tomorrow if the problem still persists.
Its on again and it looks fine until now for today.
But i saw another phenomen. Since i started with the extended log pushes a few days ago, the voltage from the meter push has heavy spikes in the values.
I will look for the values tomorrow again and stop now to change anything, we will see.
Thats it, all push values are present, the spikes from voltage are gone and everything looks how it shoud.
There is a small problem with the temperature, values in the last hour of the day are always missed, an i
Post it in another thread
It seems it is not possible to log Temperature_Powerstage directly via e.g. v7=Temperature_Powerstage, is that correct?
Log Data push has no temperature data.
Supported values are -
- Current_DC_String_1
- Current_DC_String_2
- EnergyReal_WAC_Sum_Produced
- Voltage_DC_String_1
- Voltage_DC_String_2
1 Like