Enphase Production and Consumption data don't match between Enlighten and PVOutput

Problems
#1

I’m trying to use the Enphase consumption monitoring and PVOutput’s donation features. My CTs are installed, and the data on Enphase’s Enlighten site match the net meter amounts I’m seeing in real life. However, the numbers aren’t right on PVOutput. For example, yesterday, July 31, Enlighten shows:

and

While PVOutput shows:

The curves look right, but the numbers don’t add up.
Enphase says I produced ~76KWh, and consumed ~29KWh, while PVOutput shows a production of only ~25KWh, and ~29KWh consumed. I’ve got the output configured for dual data input, one set to Solar, one set to Consumption, with the Enlighten ID and API Key set to the same one for both.

Any thoughts?

#2

Try changing the status interval to 5-minutes

#3

Done. I’ll report back with the results. Thanks!

#4

That seems to have done the trick. Thanks for the quick response!

#5

This should now also report correctly with 15-minute status intervals, although not recommended.