Hi all,
I’ve spent the last few hours searching and trying to figure out why I am getting consumption / energy used values a lot higher in PVO than solarweb.
Production is good (SW= 47.31 kwh / PVO = 47.39 kwh)
Consumption (SW = 26.85 kwh / PVO = 48.869 (energy used on live) and 49.462 (consumption in the daily)
I’ve been researching the push service settings and thinking of adding
&v3=None to meter and
&nodayenergy=1 to inverter.
but would really appreciate any advice
(Fronius Smart meter in Feed-in, wired before all loads, Fronius 5kw inter)