Trannergy invertor

Questions
#1

I have a trannergy invertor and have a account in pvoutput , mij question is if i want to see the tempeature, pv output let see the temp. from the solar pannels , i want the temp from open weather map wher i have an api from.

Is it possible to see an other temp than the panel tenperature??

pvoutput%20temp%20
pvoutput%20temp%20677×758 33.8 KB

#2

The temperature available to you is not from your solar panels but from the Inverter if your inverter has the required sensor. I don’t know of any system that has a sensor on a panel. The inverter temperature depends on how much power is being inverted, placement of the inverter and how much airflow is present. I have a solaredge inverter and have enabled Temperature which gives me the inverter temperature on my main page. If I upload my weather station temperature and do not disable this setting it will give mixed results showing both temperatures alternately as seen in the orange trace below.

image
image1894×607 40.7 KB

#3

You need to set a Weather Device. Keep the Primary Device setting as is.

#4

I have a api from open weather map but pvoutput displayed the panel temp

pvoutput%20temp%20api
pvoutput%20temp%20api648×660 42.7 KB

when i test the api and city id he gives this : {“coord”:{“lon”:6.79,“lat”:52.92},“weather”:[{“id”:804,“main”:“Clouds”,“description”:“overcast clouds”,“icon”:“04d”}],“base”:“stations”,“main”:{“temp”:8.04,“pressure”:1022,“humidity”:75,“temp_min”:7.22,“temp_max”:8.89},“visibility”:10000,“wind”:{“speed”:9.3,“deg”:340},“clouds”:{“all”:90},“dt”:1553528813,“sys”:{“type”:1,“id”:1530,“message”:0.0053,“country”:“NL”,“sunrise”:1553491462,“sunset”:1553536401},“id”:2758621,“name”:“Borger”,“cod”:200}

but the temp in pv output says: 26,4 degree

#5

Are you ‘pushing’ v5 from somewhere else to PVOutput? If you want to push the inverter temperature as well as the actual ( weather ) temperature you will need to use one of the Extended Data variables [ v7…v12 ] for the Inverter Temp.

Input Data

The rule has access to the following variables which can be used as part of the rule logic -

  • v1 - energy generation
  • v2 - power generation
  • v3 - energy consumption
  • v4 - power consumption
  • v5 - temperature
  • v6 - voltage
  • v7 - the raw v7 value
  • v8 - the raw v8 value
  • v9 - the raw v9 value
  • v10 - the raw v10 value
  • v11 - the raw v11 value
  • v12 - the raw v12 value
  • hour - hour of the day (0-23)
  • minute - minute of the hour (0-59)

Separate multiple rule statements with a semi-colon (:wink:

#6

This seems to be the case.

The primary device should be Weather not Solaredge as you have a trannergy inverter that is uploading data directly to PVOutput including temperature.

However, you won’t be able to disable the temperature uploaded by the trannergy.

#7

I think that i have not pushing a v5 i the document my settings what do i wrong.

pv%20paneel
pv%20paneel518×769 35 KB
pv%20paneel%201
pv%20paneel%201492×768 35 KB
pv%20paneel%202
pv%20paneel%202529×783 32.2 KB

#8

Change SolarEdge to Weather, you don’t have a solaredge device.

#9

Ok i will try that, thanks for the quick replay

#10

I’m sorry to say but the temp is not realy good, somtime’s good and after that the program had the wrong temp.

temp
temp856×839 174 KB
instelling-1%20
instelling-1%20674×901 48.8 KB
instelling%202
instelling%202662×895 57.9 KB

#11

This is due to the automatic upload from the Tranenergy sending temperature which will override the weather temperature.

An enhancement added soon ignore non-weather device temperature when one has been set.

#12

The trannergy temperature upload is now ignored and only openweather temperature is used as per the below change -

#13

Thans bankstownbloke for the sollution.