My RPi Zero wasn’t secured well enough, so it fell down and detached itself from the power cable.
The result is that I have data missing for Jun 20.
What can I do to have SBFSpot collect data for that date from my SB 3000TL-21 and what can I do to have SBFSpot upload that data?
/Mogens
See this thread:
How can I tell that the command actually did anything?
I can’t any data for Jun 20 on PVO after executing this command - 20 mins ago.
EDIT: I just tried for 20190620, last time I used your quoted command for 20190616.
$ /usr/local/bin/sbfspot.3/SBFspot -v -finq -nocsv -startdate:20190620
SBFspot V3.5.1
Yet another tool to read power production of SMA solar inverters
© 2012-2018, SBF (https://github.com/SBFspot/SBFspot)
Compiled for Linux (LE) 32 bit with MySQL support
Commandline Args: -v -finq -nocsv -startdate:20190620
Reading config ‘/usr/local/bin/sbfspot.3/SBFspot.cfg’
Sat Jun 22 10:42:08 2019: INFO: Starting…
sunrise: 04:27
sunset : 22:19
Connecting to 00:80:25:A4:E6:90 (1/10)
Initializing…
SUSyID: 125 - SessionID: 974388619 (0x3A13FD8B)
SMA netID=01
Serial Nr: 7EF64B6D (2130070381)
BT Signal=78.4%
Logon OK
Local Host Time: 22/06/2019 10:42:09
Plant Time : 22/06/2019 10:42:09 (0 sec)
TZ offset : 3600 sec - DST: Off
Last Time Set : 22/06/2019 07:00:03
SUSyID: 138 - SN: 2130070381
Device Name: SN: 2130070381
Device Class: Solar Inverters
Device Type: SB 3000TL-21
Software Version: 02.50.16.R
Serial number: 2130070381
SUSyID: 138 - SN: 2130070381
Device Status: Ok
SUSyID: 138 - SN: 2130070381
Device Temperature: 50.3°C
SUSyID: 138 - SN: 2130070381
GridRelay Status: Closed
SUSyID: 138 - SN: 2130070381
Pac max phase 1: 3000W
Pac max phase 2: 3000W
Pac max phase 3: 3000W
SUSyID: 138 - SN: 2130070381
Energy Production:
EToday: 4.477kWh
ETotal: 25120.731kWh
Operation Time: 28891.19h
Feed-In Time : 27431.36h
SUSyID: 138 - SN: 2130070381
DC Spot Data:
String 1 Pdc: 0.537kW - Udc: 234.97V - Idc: 2.289A
String 2 Pdc: 0.187kW - Udc: 208.21V - Idc: 0.902A
SUSyID: 138 - SN: 2130070381
AC Spot Data:
Phase 1 Pac : 0.709kW - Uac: 229.56V - Iac: 3.090A
Phase 2 Pac : 0.000kW - Uac: 0.00V - Iac: 0.000A
Phase 3 Pac : 0.000kW - Uac: 0.00V - Iac: 0.000A
Total Pac : 0.709kW
SUSyID: 138 - SN: 2130070381
Grid Freq. : 50.01Hz
SUSyID: 138 - SN: 2130070381
Current Inverter Time: 22/06/2019 10:42:04
Inverter Wake-Up Time: 22/06/2019 04:27:16
Inverter Sleep Time : 22/06/2019 10:42:09
- ArchiveDayData() *
startTime = 5D0AB060 -> 20/06/2019 00:00:00
- ArchiveMonthData() *
startTime = 5CF25AB0 -> 01/06/2019 13:00:00
Reading events: 2019-Jun-01
Sat Jun 22 10:42:12 2019: INFO: Done.
/Mogens
Yes, that was just an example 
Is it ok now?
Sorry for the late reply.
I had to connect my Windows computer and extract data from the inverter, and manually enter those data in PVO.
But the RPi Zero runs fine again.
/Mogens